YT800000009 Air shower channel
Miss Cai QQ: 1851866318
1. Technical Parameters
Cargo Shower Room / Cold Rolled Steel Plate Paint Thickness 1.2mm 5000 * 3000 * 2500, Single Channel: 1150 * 3000 * 2000 (Size Can be formulated according to customer requirements)
1. Air shower room purification filter system: equipped with high-efficiency filter (filtration efficiency is firstname.lastname@example.org) and G4 grade primary effect filter;
2. Box material: outer box body and inner wall material are both It is a high-quality cold-rolled steel plate with a paint thickness of 1.2mm;
3. It is equipped with 48 multi-angle adjustable full-mirror stainless steel nozzles (material thickness 1.0mm, wind nozzle diameter ∮35mm), left, right and top three sides;
4. Anti-static PVC curtain, suitable for workshops with large flow of people
5. Control: advanced integrated circuit control, microcomputer intelligent system, touch micro switch, LED display blowing time, equipped with Chint intermediate relay, time relay, air shower time 0-300 seconds adjustable, equipped with OMRON photoelectric sensor for automatic blowing; the control board is placed in a separate control room.
6. Use stainless steel nozzles as the most basic configuration of the air shower room; no bottom plate.
7. Air shower room working area lighting system: equipped with 6 20W Philips fluorescent lamps;
8, equipped with 6 DSX wind shower room dedicated fans, fan power: 0.75Kw / set;
9, professionally designed air shower supply air blowing shower system , Outlet wind speed ≥25m / s .;
10. One year warranty (except for damage caused by human factors), lifetime maintenance.
11. Equipped with 6 primary effect filters
2. Operating instructions
1. Connect to 380V, 50HZ power supply (L1, L2, L3-fire wire, N-neutral wire, E-ground wire), turn on the work and lighting switch, and confirm that the fan and lighting work normally. At this time, the air shower is in the initial state , Personnel can perform normal operations.
2. Door entry procedure:
Wear anti-static clean clothes → open the front door, personnel / goods enter → air / cargo shower room begins to blow, the wind speed is above 25m / s Several times to keep the whole body completely in the wind shower) At this time, the electric lock works, and the front and rear doors cannot be opened → The wind shower room automatically stops after 15 seconds of wind shower (the wind shower time is set to 15 seconds by the factory at the factory. (Can be set by the user) At this time, the front door electric lock works, personnel / goods are not allowed to exit from the front door → open the back door, personnel go out → the door entry process is completed
3. The door exit procedure
opens the back door, personnel enter → when going out, the air shower room does not blow , Directly open the front door, and the personnel exit the clean room → the exit process is over
|Shipment||A batch of 400 typhoon shower room|
|Assembled interior photos||PLC controller|
|Three-channel type, convenient for employees to pass quickly||Yuantuo is responsible for on-site assembly and debugging|
|The bottom fan is a professional purification fan with low noise and large air volume||Connect each main line carefully to ensure that there is no problem during use|
|After assembly, it is ready to be put into use|
Shanghai Yuantuo Purification undertakes the production of various types of air shower rooms / cargo shower rooms. Welcome to contact us to
order the hot shower room hotline: 15221126962 Miss Cai QQ: 1851866318 MSN: email@example.com Email: firstname.lastname@example.org