YT800000341 Laminar flow hood
Number of views:
Product serial number
Laminar flow hood / weighing room
Miss Cai QQ: 1851866318
Product Code: YT800000341 Product Name: Laminar Flow Hood Customer: Chengdu Xinlibang Pharmaceutical
Applicable customers: biomedicine, pharmaceutical, food and other industries
Main function: ensure the cleanliness of the operation area is CLass 100; maintain the relative positive pressure of the operation area to other areas
The 100-level medical laminar flow hood is an air purification unit that can provide a local clean environment. The 100-level medical laminar flow hood can be used singly or in combination.
Clean area. The hundred-level medical laminar flow hood is to pass air at a certain wind speed through a high-efficiency filter to form a uniform flow layer, so that the clean air is vertical and unidirectional
Flow, thus ensuring a high degree of cleanliness in the work area to meet the process requirements.
Application of 100-level medical laminar flow hood:
The 100-level medical laminar flow hood has two types: built-in fan and external fan, and the installation methods are suspended and floor support.
Cleanliness: s3.5 particles / litre of ≥0.5m in the working area (FS209E class 100)
Noise: ≤60 Db (A)
Average wind speed: 0.35-0.60m / s
Compared with the clean room, the 100-level medical laminar flow hood has the advantages of low investment, quick effect, low requirements on the civil construction of the plant, easy installation, and power saving. It is currently widely used
Used in precision machinery, electronics, pharmaceuticals, food, fine chemicals and other departments.
Material: SUS304 * 1.2MM
|Isolator under the laminar flow hood to ensure the cleanliness of the operation area||A flow-sharing membrane is installed below, and the wind direction flows through the flow-sharing membrane to form a flow-sharing layer to ensure uniform wind speed in the operation area below|
|A flow-sharing membrane is installed below, and the wind direction flows through the flow-sharing membrane to form a flow-sharing layer to ensure uniform wind speed in the operation area below||The wind speed sensor is installed under the current-sharing membrane, and the wind speed is transmitted to the PLC control unit in real time, which is used for the inverter to automatically adjust the wind speed in real time|
|The overall set wind speed is 0.45M / S, and the fan speed will automatically increase after the filter is used for a period of time to meet the requirements of the operating space||The cabinet is equipped with a pointer differential pressure gauge, which is used to observe the use of the filter and provide a basis for whether to replace the filter|
|The tank is installed with a liquid tank type high-efficiency filter and a special teardrop lamp. The lighting control is located in the PLC control and is controlled by a touch screen.||Tempered glass brackets are installed below the laminar flow height to isolate the external airflow|
|The laminar flow box is installed with PAO dust outlet and sampling port, which is installed with KF interface and sealed when not in use||Stainless steel bracket with tempered glass baffle under laminar flow hood|
Scan the QR code to read on your phone
We could not find any corresponding parameters, please add them to the properties table